Women's coat pattern with lining. Made from coat fabric.
Patterns are suitable for dense shape-forming coat fabrics.
The shoulder line is widened. The silhouette is straight. Sleeve is set-in, two-seam.
On the front panel, there is a flap pocket with sewn-in edges. There is a vent on the back.
The collar is a turn-down on a stand, with a lapel. The bust dart is moved under the collar.
Fastening with buttons.
When choosing the right size, please use the size charts provided below.
To determine an adult size, measure the chest circumference, divide this value by two, and you will get the size.
For example, a chest circumference of 100 means size 50.
Check the chart and compare it with the waist and hip measurements.
After you have chosen the actual size, please pay attention to the finished garment measurements based on the patterns.
The measurements can be found in the gallery of each model.
Also consider the fabric properties.
For children, measure height and check the chest, waist, and hip measurements in the chart.
Allowances are indicated for standard circumferences.
Standard sizes are in the chapter "Choosing a size".
| Allowance | cm |
|---|---|
| Chest | +18 |
| Waist | +37 |
| Hips | +14 |
Needed: buttons — 4 pcs., shoulder pads.
| Materials | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | 42 | 44 | 46 | 48 | 50 | 52 | 54 | 56 | 58 | |
| Main fabric (width 1.5 m) | 2.50* | 2.55* | 2.55* | 2.60* | 2.60* | 2.60* | 2.65* | 2.65* | 2.70* | |
| Interfacing (width 1.5 m) | 1.30* | 1.30* | 1.35* | 1.35* | 1.35* | 1.35* | 1.40* | 1.40* | 1.40* | |
| Lining (width 1.5 m) | 1.50* | 1.55* | 1.60* | 1.60* | 1.80* | 1.80* | 1.85* | 1.85* | 1.85* | |
* material consumption is given without allowances for shrinkage, pattern direction, nap, plaid or stripe, distortion, gaps, and other technological consumption
Immediately after payment for the “Electronic Pattern,” a zip archive will be delivered to your personal account.
The zip archive must be unzipped and the files downloaded to your device.
If you plan to download the files to your phone, please check whether an archiver app is installed.
The folder contains:
1. A document with a technical drawing, a table of measurements based on the finished pattern pieces (lengths and widths),
a short description of the model, all required materials for each size separately (main fabric, lining, fusible interfacing, elastic, buttons, etc.),
a fusing/interfacing placement diagram (if interfacing is recommended for this model),
the sewing process steps and a miniature layout of the pieces for convenient pattern assembly in PDF format.
2. A photo of the selected model with a technical drawing, the model number, and the available sizes.
3. A recommended fabric layout.
4. A PLT file for self-printing on a plotter, 90 cm width.
Pattern pieces for one size with seam allowances, grainline, required notches, and auxiliary outlines marked.
5. A PDF file with the pattern for self-printing on a printer.
Pattern pieces for one size with seam allowances, grainline, required notches, and auxiliary outlines marked.
Additionally, you can order the “Printing Service.” The “Electronic Pattern” is provided by default.
The order is completed within one to three days.
You will receive, via Nova Poshta, printed pattern pieces on thick kraft paper (paper weight 80)
for one size, with seam allowances, grainline, required notches, and auxiliary outlines marked.
These pattern pieces do not need to be taped together—only cut out. If desired, you can also order “Printing of Technical Documentation” —
1. A document with a technical drawing, a table of measurements based on the finished pattern pieces (lengths and widths),
a short description of the model, all required materials for each size separately (main fabric, lining, fusible interfacing, elastic, buttons, etc.),
a fusing/interfacing placement diagram (if interfacing is recommended for this model),
the sewing process steps and a miniature layout of the pieces for convenient pattern assembly in PDF format.
This document is already available in electronic format in your personal account.
Download the PDF patterns to your device.
In the printer settings, select 100% scale.
Neatly stack the A4 sheets and place them in the printer tray.
First, print the first page with the test square.
Measure the sides of the square with a ruler. The square must be 10×10 cm.
Only after confirming the square is 10×10 cm, print the entire pattern.
In the upper-left corner of each A4 page, there is a letter and a number. The letter indicates the row; the number indicates the sheet’s position in the row.
Together with the pattern, you will receive a document that contains a layout diagram for the PDF sheets. Use it as a guide when arranging the pages.
Arrange the pages by rows.
Assembly: In the top row, trim the right margin. Overlap the next sheet onto the untrimmed part and glue it in place. In each lower row, trim the top and right margins. Overlap the sheets onto the untrimmed part and glue them in place.
